|
 |
TITANIUM KEYCHAIN
Always wanted a complete titanium minibike? Here it is, at a price
anyone can afford. Includes titanium minifob and chrome ring.
|
|
PARTS |
|
|
 |
THRUST CHAMBER - Spark Arrested
This CNC machined billet
aluminum piece works in tandem with your excellent stock exhaust system for
better power without increased sound levels.
Performance similar to many complete
aftermarket exhaust systems! Better throttle response and increased
top end. Works with stock spark arrestor.
AVAILABLE FOR:
HONDA CRF50, CRF70, CRF80, CRF100,
CRF150, CRF230. XR50, XR70, XR80 (2001 & later), XR100 (2001 &
later).
KAWASAKI KLX125, SUZUKI DRZ125,
YAMAHA TTR125
SELECT
MODEL AND COLOR BELOW.
|
|
 |
THRUST NOZZLE - Not Spark Arrested
No need for the spark
arrestor?
The Thrust Nozzle will give
you better power than running without the stock end cap. Power gains as
good as or better than some complete aftermarket systems! Louder and
throatier sounding than the Thrust Chamber, but still more stealthy than
aftermarket mufflers. Replaces the stock spark Arrestor unit.
Brushed Stainless Steel
FITS:
HONDA CRF50, CRF70, CRF80, CRF100.
XR50, XR70, XR80 (2001 & later), XR100 (2001 & later).
|
|
 |
VENTED VALVE CAP
This Billet cap
produces more power by allowing the engine to vent excess crankcase
pressure. Reducing crankcase pressure will allow your engine to rev
higher and pull harder! Installs in place of the stock
intake valve cover.
WORKS WITH:
Honda Horizontal OHC engines: 50, 70. Also TRX 90 and
TRX 250EX.
CHOOSE COLOR:
|
|
BOLT KITS |
|
|
 |
|
MOTOBOLT KIT INCLUDES:
3 - M6xp 1.0x16mm 8mm Flange Bolt
3 - M6xp 1.0x25mm 8mm Flange Bolt
1 - M6xp 1.0x40mm 8mm Flange Bolt
1 - M8xp 1.25x30mm 10mm Flange Bolt
2 - M8xp 1.25x16mm 10mm Flange Bolt
3 - M6xp 1.0x10mm Allen Head Bolt
3 - M6xp 1.0x16mm Allen Head Bolt
3 - M6xp 1.0x25mm Allen Head Bolt
1 - M8xp 1.25x40mm Allen Head Bolt
2 - M8xp 1.25x25mm Allen Head Bolt |
2 - M6-1.0 x 30mm Pan Head Screw
3 - M5-0.8 x 10mm Pan Head Screw
3 - M6-1.0 x 16mm Pan Head Screw
2 - M8-1.25 Flange Nut
2 - M6-1.0 Flange Nut
2 - M6-1.0 Nylon Insert Lock Nut
2 - M6-0.75 Hex Nut
8 - 8mm ItD x 17mm Flat Washer
8 - 6mm ID x 12.5mm Flat Washer
10 - 6mm ID x 18mm Fender Washer |
|
|
 |
ALLEN BODY BOLT KIT
INCLUDES:
4 -
M6xp1.0x10mm Allen Head Bolt
4 - M6xp1.0x16mm Allen Head Bolt
4 - M6xp1.0x16mm Allen Head Bolt
6 - 6mm ID x 12.5mm Flat Washer
6 - 6mm ID x 18mm Fender Washer
2 - M6-1.0 Nylon Insert Lock Nut
|
|
 |
FLANGE BODY BOLT KIT
INCLUDES:
4 -
M6xp1.0x10mm 8mm Flange Bolt
4 - M6xp1.0x16mm 8mm Flange Bolt
4 - M6xp1.0x25mm 8mm Flange Bolt
6 - 6mm ID x 12.5mm Flat Washer
6 - 6mm ID x 18mm Fender Washer
2 - M6-1.0 Nylon Insert Lock Nut
|
|
APPAREL |
BAD ASS GEAR
Show some attitude with the original Bad Ass!
Bored with the kinder
and gentler rider of 2K? Wishing you were back 20 years ago when
riding was a burly, manly thing to do?
Powroll's riding donkey emerged back
in the 1970's - when burly and manly were the ONLY way to fly.
Long before the industry became warm, fuzzy and 'politically
correct'. Barf.
Four strokes aren't
warm and fuzzy - neither are we.
Now the thumper is
back in a big way, we say it's high time to bring this Bad Ass back to
life. |
|
 |
TRUCKER HAT
Mesh for your Mullet & Bad Ass attitude for everything else.
|
|
 |
BASIC BAD ASS TEE
White tee with black and red graphic
on the back and Bad Ass Gear logo front and center.
Made of white 100% cotton by Port &
Co, with high quality heavyweight material that won’t shrink or
fade.
|
|
 |
HOODY PULLOVER
Bad Ass Gear logo on the front - and
one big bad Ass on the back!
Gildan®
Ultra Cotton™ - Pullover Hooded Sweatshirt: 9.5-ounce, 90/10
cotton/poly fleece; 2 x 1 fashion rib with Lycra; double-lined
hood, with matching drawcord, double-needle stitching throughout,
banded bottom, set-in sleeves.
|
|
 |
LADIES CAP SLEEVE TEE
Bad Ass Gear square logo on front -
clean back.
District Threads™ Tee with Raglan
styling and trend-right abbreviated cap sleeves. Tailored and
updated with a feminine cut that's smaller through the body and
sleeves.
Fabric: 5.9-ounce, 100% ring spun combed cotton for a soft hand.
~SIZING
INFORMATION~
|
|
 |
LADIES FLEECE PANT
Fleece pant with Bad Ass long logo
across the back - show off your bad ass (gear, that is).
District Threads™ Contemporary
straight leg cut with an open bottom leg. Fabric is 100%
7.5-ounce ring spun combed cotton. Complete with drawstring waist
with extra fabric for support. Reinforced throughout with
double-needle stitching.
|
